Rededge-P
GIMBAL STABILIZZATA A MULTI SENSORE
Zoom ottico 30X RGB HD, Termocamera LWIR 640p con ottica 50mm
Gemini X30T-V è un Gimbal ISR professionale Doppio Sensore IR-EO con
telecamera Zoom 30x FullHD e Sensore Termico 640x480p con ottica 25mm.
KEY FEATURES
Incrase storage
New professional removable storage standard in CFexpress, enabling over two captures per second and the immediate turnaround time between flights by simply swapping cards.
Synchronized capture of high-res rgb and multispectral
Simultaneous capture of up to six bands, enabling multiple high-resolution outputs such as RGB, crop vigor indices (NDVI, NDRE, etc), and high resolution panchromatic.
Twice the spatial resolution of the previous rededge
With a high-resolution panchromatic imager, RedEdge-P enables higher-resolution RGB and multispectral outputs – 2cm resolution when flying at 60m. Spot smaller problems or features sooner and make more reliable management decisions across a variety of use cases.
Works with what you have (drones, processing, flight planning)
This solution is compatible with a wide range of aircraft, from large fixed wings to small multirotors. Flight planning and data processing can be done with industry-standard tools.
Rugged design
IP4X rated for dust and splash protection
PLANT COUNTING
Plant counting algorithms require high-resolution imagery. RedEdge-P combines a Panchromatic lens with 5-high-res multispectral lenses enabling high-res RGB and multispectral outputs, allowing plant count even at early growth stages.
PHENOTYPING
Manually measuring plant characteristics is time-consuming. RedEdge-P band combination enables high-resolution multispectral outputs, allowing the detection of variability at the leaf level.
PLANT HEALTH MAPPING
RedEdge-P’s high-resolution multispectral outputs allow the generation of indices and composites to see individual chlorophyll levels in the plants and compare over time.
FERTILIZER MANAGEMENT
RedEdge-P’s high-res and accurate outputs allow easy identification of areas low in nutrients and help monitor the effects of fertilizer applications throughout the season and determine if, when, and where a new application is needed.
DISEASE IDENTIFICATION
RedEdge–P captures a critical part of the light spectrum for studying plants (712–722 nm), called the red edge band. It is in this section of the spectrum that the first signs of stress start to show. Using analytics generated with the red edge band, it is possible to identify disease sooner and act faster to stop the spread.
SPECIES DIFFERENTATION
Some differences among species may not be visible to the naked eye. High-res multispectral data allows for species differentiation, weeds included, by highlighting characteristics such as chlorophyll content, vigor, and leaf size.
ADVANCED CROP SCOUTING
High-res multispectral and RGB imagery provides advanced field scouting capabilities. In one flight, it is possible to collect accurate and geotagged information of a problem, making it easy to assess the situation and determine the appropriate intervention.
HIG-RES 3D POINT CLOUDS
RedEdge-P’s 5.1-Megapixel panchromatic band provides over twice the ground resolution of the industry-standard RedEdge-MX, resulting in 3D point clouds with up to 4 times the point density.
NEED A DRONE?
Have a sensor, but need an integration kit? Looking for a full drone and sensor solution? Want hands on training?
LOOKING FOR A SOFTWARE SOLUTION?
With MicaSense you own your data. Visit our software solutions page and choose the platform that’s best for you, your customer, or your project.
Orthomosiac
Orthomosiac (3.26GB)
Fully processed orthomosaic captured in October 2021 in the Pacific Northwest over a pumpkin farm. The pan-sharpened GSD of the flight is 2cm per pixel.
Note that the output format is GeoTiff and is intended to be viewed using GIS software (QGIS , ArcPro, ArcMap…).
RedEdge-P Sensor Specifications
| Weight | 350 g (12.3 oz.) (RedEdge-P + DLS 2) |
| Dimensions | 8.9 x 7.0 x 6.7 cm (3.5in x 2.8in x 2.6in) |
| External Power | 7.0 V – 25.2 V |
| Power Input | 5.5/7.0/10W (standby, average, peak) |
| Sensor Resolution | 1456 x 1088 (1.6MP per MS band) 2464 x 2056 (5.1MP panchromatic band) |
| Spectral Bands | Blue, green, red, red edge, near-IR (global shutter, narrowband) |
| Wavelength (nm) | Blue (475 nm center, 32 nm bandwidth), green (560 nm center, 27 nm bandwidth), red (668 nm center, 14 nm bandwidth), red edge (717 nm center, 12 nm bandwidth), near-IR (842 nm center, 57 nm bandwidth) |
| RGB Color Output | 5.1 MP (global shutter, aligned with all bands) *with appropriate post-processing |
| Ground Sample Distance (GSD) | 7.7 cm per pixel (per MS band) at 120m (~400 ft) AGL 3.98 cm per pixel (panchromatic band) at 120m (~400 ft) AGL |
| Capture Rate | Up to 3 captures per second raw DNG |
| Interfaces | 3 configurable GPIO: select from trigger input, PPS input, PPS output, and top of frame signals. Host virtual button. USB 2.0 port for WiFi. Serial. 10/100/1000 Ethernet. CF Express for storage |
| Field of View | 50° HFOV x 38° VFOV (MS) 44° HFOV x 38° VFOV (PAN) |
| Storage | CFexpress Card |
STANDARD KIT
REDEDGE-P KIT INCLUDES:
• RedEdge-P sensor
• DLS 2 with embedded GPS
• Calibrated Reflectance Panel (CRP 2)
• USB WiFi dongle
• Lens cover
• Necessary integration cables
• Assorted mounting hardware
• CFexpress card
• CFexpress card reader
• Hard Carrying Case
• Quick Start Guide
DJI SKYPORT KIT
REDEDGE-P KIT INCLUDES:
• RedEdge-P sensor
• DJI SkyPort Mount
• DLS 2 with embedded GPS
• Calibrated Reflectance Panel (CRP 2)
• USB WiFi dongle
• Lens cover
• Necessary integration cables
• Assorted mounting hardware
• CFexpress card
• CFexpress card reader
• Hard Carrying Case
• Quick Start Guide
Parla con un nostro Esperto
Chiamaci ORA!
+39.0541.1790411
Richiedi informazioni
Inserisci i tuoi dati quì sotto, il nostro consulente ti
ricontatteràal più presto e ti fornirà tutti i dettagli!
"*" indica i campi obbligatori
