Zenit
PRO RTK
Designed and manufactured in Italy with high quality
components to meet the most stringent
specifically in the industrial field.
ROBUST. RELIABLE. FIELD-TESTED
BUILT TO LAST - DESIGNED TO FIT
Zenit Pro RTK is technological innovation combined with uncompromising efficiency and safety.
Exceptional performance and capabilities, along with many cutting-edge technologies,
guarantee a safe and precise flying experience in any field of use.
REVOLUTIONARY ASPECTS AND REFINING LEAD TO NEW HEIGHTS
IP-43 waterproof and dustproof structure, powerful motors and 20″ folding propellers
make the Zenit PRO RTK capable of flying up to 210′ with a transmission range of 15km in any environmental condition,
with winds up to 14 m/s and maximum speed of 140 km/h.
15
KM
transmission
data + video
140
MIN
autonomy
of flight
140
KM / H
of speed
maximum
2.5
KG
of payload
transportable
1080P
FULLHD
video
downstream
IP43
LEVEL
waterproof
to water
Ready for everything
ADVANCED MULTI-MISSION UAS
Cutting-edge electronics, open architecture,
Wide availability of interfaces coupled with large load capacity
and an unrivaled range, make Zenit Pro RTK
A new benchmark for tactical drones under 25 kg.
I/O ports, CAN, UART, I2C, PWM, S-Bus and API
enabling the creation of an integrated intelligent control
systems for each connected peripheral, sensor
or camera.
Multirole
Modular structure e
versatile suitable for every
application
High quality
Completely
made of materials
selected composites.
Accurate
Centimetric accuracy
with GNSS RTK systems
Safe
With electronics
redundant last
generation
Intelligent
Precise autonomous flight
and reliable System
360 ° Lidar anti-collision.
Customizable
Qualified technicians to yours
service for custom projects.
Main Features
– Durable and lightweight folding frame
– IP43 Waterproof to rain and dust
– Powerful brushless motors with 20″ folding propeller.
– Smart controller with ultra-bright 5.5″ touch display.
– State-of-the-art redundant flight controller for maximum reliability
– Accurate with U-Blox M8P GNSS Receiver (RTK ready)
– Adaptable with Multisens Hub and Quick Mount for any sensor and Gimbal
– Resistant to extreme temperatures -10°/+50°
– Weight: 7 kg with battery (lipo Semi Solid 30ah 12S), chassis weight 2.5 kg
– Maximum payload: 2.5 kg
– Dimensions: open 1200*1100*350*, folded 950*830*275 mm
SMART CONTROLLER
SMART CONTROLLER 5.5 “
The Smart Controller was designed to maximize
your flying experience in all environmental conditions
thanks to its small size, to the integrated touch display
5.5 ”ultra-bright and IP53 waterproof structure.
Thanks to the dedicated Android system, the smart controller can be customized to give you the best flight experience as well as allow you
to install third-party apps for specific needs.
Main characteristics
• FullHD 5.5 ”1000 cd / m2 Touch Display
• 16 direct control channels for Drone and Sensors functions
• 15km of data and video transmission range
• AES 128 encrypted signals (AES 256 on request)
• FullHD 1080p H264 / H265 video signal
• 180ms of maximum latency
• 3G / 4G ready with MicroSIM slot (sim not included)
• Double Master-Slave operator
• Android 9.0 inside
• Up to 12 hours of autonomy of use
• Fast charging (3 hours)
Autonomous Missions in 1 Click
WITH DEDICATED APP AND SOFTWARE
Simple and intuitive drone control interface with specific tools for photogrammetry and 3d survey. SmartLink provides a precise and simple tool that makes it easy to manage the most advanced features. Gimbal and the zoom functions can be used while the drone flies its already planned route.
Main functions
– Autonomous takeoff and landing
– Automatic scans for photogrammetry with dedicated tool
– Flight with individually or group programmable Waypoints
– Predefined templates for quick scans
– Automatic 3D scanning of the building
– Automatic acquisition of georeferenced photos
– Electronic virtual fence
– Automatic calculation of flight time and mission details
– KML data import, DEM and DTM data import *
– 3D object import tool *
*only with UGCS Pro software (optional
Command & Control
CONTROL YOUR DRONE REMOTELY IN BVLOS 4G / 5G
Imagine having to coordinate BVLOS operations of Video Surveillance, Search Missing, Inspection or Delivery from a Remote Operations Center.
Command & Control allows you not only to remotely control fleets of drones on the territory but also to schedule automatic missions , share the video stream and the telemetry of the Drone wherever you are, via the internet thanks to SkyLink 4G that can be installed on any Drone
4G LTE BVLOS SkyLink
– Centralized drone fleet management (max 30 UAVs)
– Real-time FullHD 1080p video streaming
– Map monitoring of each drone
– Complete flight information
– Remote control of the gimbal and sensors
– Remote recording of video and flight logs
– AES265 data encryption
Centimeter Accuracy
WITHOUT GCPs
Drastically reduce scan times,
decrease the volume of data to be processed!
Safely tackle mapping and surveying jobs
in dangerous or inaccessible places without having to place GCPs
RTK / PPK technology
No more Targets on the ground thanks to Direct Centimetric Georeferencing with RTK Technology and PPK * (Post Processing Kinematic) on board. Total management of the Base / Rover station, RINEX log recording and NMEA output configuration.
• Simple and intuitive interface via App
• Fast management and export of Rinex logs via wifi
• Multi-frequency system L1OF, L2OF, L1C / A, L2C, E1B / C, E5b, B1I B2I
• Positioning accuracy 1 cm + 1 ppm (horizontal) 1.5 cm + 1 ppm (vertical)
What can he do?
ZENIT Pro RTK RTK is the result of numerous field tests in various operational scenarios.
Hundreds of hours of flight time in the most prohibitive conditions have made the Zenit PRO RTK
One of the best performing multirole industrial drones on the market
Versatile
SELECT THE MOST SUITABLE SENSOR FOR YOUR TWO NEEDS
Transform ZENIT Pro RTK in a moments to suit your needs
Without any setup or difficult wiring.
Quick Mount
The brand new and exclusive HOT SWAP Quick-Mount system allows.
to switch from a payload (gimbal or Sensor)to another in a few seconds without any setup and without having to turn off the drone.
ISR payload
Single and Multi Sensor
• RGB sensors up to 25mp
• 4K video
• Optical zoom up to 30x (digital 12x)
• 640p 30fps thermal imaging cameras
• Optics up to 50mm
• Laser Range Finder 4 000mt
• Calculation of distance and Target Coordinates
• Automatic target tracking
• IR + RGB georeferenced photos
• IR, RGB, and PIP display
Cameras and Sensors
RGB, radiometric and industrial
• Radiometric thermal cameras
• Multispectral cameras
• RGB cameras up to 120mp
• 3D Lidar
• Multigas sensors
• Radiation sensors
• Georadar
• Echosonar
• Metaldetector
Industrial Mapping Cameras
Industrial mapping cameras with ultra-small size and very low weight.
3D Lidar for Drones and Ground Vehicles fully integrated with IMU and precision GNSS systems.
Scans up to 2 km2/hour
Plug&Play
Ready-to-use mapping solution
for aero-photogrammetry
And 3D models with Drone.
Ultralight
Customization of the camera body brought the weight between 100g and 160g
High Quality
High-quality images thanks to APSC/FullFrame
Sony sensors up to 61 mp
Ready for RTK/PPK
The interfaces of our Mapping Cameras allow easy connection with RTK and PPK systems of any brand
Sharp image
Low distortion German-made
fixed focus industrial lenses
25-35-40-56 mm
Drone ready
Directly controlled PWM interfaces,
9-28 volts direct power supply,
HDMI video output and intelligent configuration
Lidar 3D for Drones
Maximum performance in small size and competitive price.
3D Lidar for Drones and Ground Vehicles fully integrated with IMU and precision GNSS systems.
Scans up to 2 km2/hour
Plug&Play
Ready-to-use solution for
restitution of point clouds
And precision 3D models.
Precise and Accurate
Ultra-high precision inertial platforms and RTK GPS for precise and accurate restitution.
Triple Echo
Triple Echo technology to penetrate the densest vegetation and achieve accurate DTM.
Smart
Mission planning apps and software with dedicated tools for
3D Lidar Scans
Software included
Simple post-processing software
and fast for POS data management
and return Cloud
Camera ready
Control interface for external cameras and sensors to color the cloud with RGB, thermal and multispectral images
Zenit Pro RTK Ready to Fly
Includes:
1x Drone Zenit Pro RTK ready to fly
1 x Quick Mount interface and multisense HUB for Gimbal and Sensors
1 x 16 Ch Smart Controller wth 5.5″ touch display
1 x Drone control app and autonomous mission planning
1 x Drone control software and autonomous mission planning
1 x 30Ah 12S 10C Semi-solid Lipo Batteries
1 x Smart-Duo 600w charger (charges 2 batteries simultaneously in 70′)
1 x Rugged Transport case
1 x USB charger for Smart Controller
1 x USB cable for Drone / PC connection
1 x Screws and assembly / disassembly tools
1 x 12 months warranty and remote/on-site assistance
1 x User Manual
Transportable
The Modular Carbon structure with quick-connect arms.
and landing gear and Quick Mount for Gimbal and sensors
allows you to carry Zenit Pro RTK easily thanks to the IP67
Rugged Pelican case with custom high-density foam.
IP 67 rugged carrying case:
– Case dimensions: 816x540xH426
– Empty weight: 12kg (with sponges)
– IP67 airtight
– Automatic pressurization valve
– Security locks with 5 connections
– Trolley system with integrated wheels
• Stackable
What it can contain:
1 x Zenit Pro RTK Drone
1 intelligent controller
2 semi-solid Lipo batteries 22Ah 6S 10C
1 ballistic parachute
1 Smart Duo 600 W charger
1 x screws and assembly/disassembly tools
1 x ISR Gimbal/Camera Sensor/Lidar
1 cable and accessories
Technical details
DRONE
3k carbon frame material
IP43 degree of protection
Motor diagonal 90 mm
Drone dimensions open 1200*1100*350*, folded 950*830*275 mm
Weight 7.0 kg (with battery, no Payload)
MTOW 9.5 kg
Load capacity 2.5 kg
Flight duration 200 feet (without payload), 140 feet at 1 kg
Flight accuracy (GPS/RTK) V: ±0.5 m, H: ±1.5 m (RTK: V: ±0.1 m, H: ±0.05 m)
Maximum speed 40 m/s – 140 km/h (without wind)*
Maximum angular speed Step: 240°/s, Yaw: 100°/s*
Maximum uphill speed 2 m/s*
Maximum downhill speed 1.5 m/s*
Maximum transmission range 15 km
Maximum ceiling 4000mt @8kg
Temperature range from -10°C to + 50°C
Wind resistance 12 m/s
Start-up time 2′
Battery charging time 70′
SMART CONTROLLER
| Display | 5.5-Inch 1000cd/m2 1080p HD touch Display |
| System | Android 9.0, 8-Core CPU, 2G RAM, 16G ROM |
| Transmission Range | 15km @1080p HD Digital Image Transmission |
| Frequency | 5.725 to 5.850 GHz |
| Video Quality | 1080p@60fps H.264/H.265 Decoding |
| Low Latency | 20ms Control/Telemetry, 180ms Video |
| Video Output | HDMI |
| Battery Life | 15 hours |
| Connectivity | 3G/4G (SIM Card Slot), WiFi, Bluetooth |
| Battery Capacity & Type | 10200 mAh 7.4V 2S Li-on (integrated) |
| Charging Time | 3 hours Fast Charging Type-C (PD30W) |
| External Storage | TF Card Slot |
| Tripod Mount | 1/4-inch |
| External RTK | Serial Port (4-Pin) |
| Data Transfer | USB-A |
| Waterproof Level | IP53 |
| Working Temperature | -10°C – 55°C |
| Dimension (Antenna Foled) | 189 x 138 x 41 mm |
| Weight | 850 g |
Talk to one of our experts
Call us NOW!
+39.0541.1790411
Request information
Enter your details below, our consultant will help you
will contact you as soon as possible and provide you with all the details!
"*" indicates required fields
